Onkyo TX-NR535 manual Connecting speakers

2 Connecting speakers

Important: The power cord must be connected only after all other connections are completed.

123

6

45

1 2 Front speakers

3Center speaker

45 Surround speakers

6Subwoofer

¼¼Up to two subwoofers can be connected.

It is ideal to install the front speakers and center speaker at the height not too far from that of the screen. As for the surround speakers, it is recommended to install at the position slightly backward of the listening position and higher than the listener's ears, since it is preferable to obtain a diffused sound rather than a direct sound. As a bass sound reproduced by subwoofer is less directional, it is possible to place it at any position. Consider the best installation position where a bass sound can be clearly heard by listening to actual playback.

Connect speakers with 6 Ω to 16 Ω impedance. Using a speaker with less impedance than the supported value may result in failure.

Front R

Connection of each speaker: Correctly connect + and -. Using the colored labels for speaker cables will help correct connection.

Surround R Surround L

1/2"-5/8"(12-15 mm)

Cut and remove the plastic coating from the end of the speaker cable, twist the core and connect it to the terminal. Make correct connection between the unit's jacks and

Step 1: Connections

Front L

Center

Subwoofer with built-in

power amplifier

speaker's jacks (+ to + and - to -) for each channel. If connection is wrong, a bass sound may become poor due to reverse phase. Attaching the supplied colored speaker cable

5