Onkyo TX-NR717 Connecting the AV Receiver, En-12, Connecting Your Speakers, Speaker Configuration

Models: TX-NR717

1 148
Download 148 pages 38.42 Kb
Page 12
Image 12

Connecting the AV Receiver

Connecting Your Speakers

Speaker Configuration

The following table indicates the channels you should use depending on the number of speakers that you have.

No matter how many speakers you use, a powered subwoofer is recommended for a really powerful and solid bass.

To get the best from your surround sound system, you need to set the speaker settings automatically (page 35) or manually (page 55).

Number of

2 3 4 5 6 7 7

7 8 8 9 9 9

10

11

speakers

 

 

 

 

Front speakers

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

 

 

 

Center speaker

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

 

 

 

Surround

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

speakers

 

 

 

 

 

 

 

 

 

Surround back

✔ ✔

 

speaker*1*2

 

 

 

 

Surround back

✔ ✔

 

speakers*2

 

 

 

 

Connections

Front high

Front wide

 

 

Front wide

Front high

 

right

right

Front right

Front left

left

left

Center

Surround

Surround

Surround

Surround

right

back right

back left

left

Front high

✔ ✔ ✔

speakers*2

 

 

 

 

Front wide

✔ ✔ ✔

speakers*2

 

 

 

 

*1 If you’re using only one surround back speaker, connect it to the SURR BACK L terminals.

*2 Front high, surround back and front wide speakers cannot be used at the same time.

Connecting the Speaker Cables

The following illustration shows how to connect the speakers to each pair of terminals. If you’re using only one surround back speaker, connect it to the SURR BACK L terminals.

Tip

You can specify whether surround back, front high, or front wide speakers are connected in the “Speaker Configuration” menu (page 55) or during Audyssey 2EQ® Room Correction and Speaker Setup (page 35).

Screw-type speaker terminals

Strip 1/2" to 5/8" (12 to 15 mm) of insulation from the ends of the speaker cables, and twist the bare wires tightly, as shown.

1/2" to 5/8" (12 to 15 mm)

Banana Plugs (North American models)

• If you are using banana plugs, tighten the speaker terminal before inserting the banana plug.

• Do not insert the speaker code directly into the center hole of the speaker terminal.

En-12

Page 12
Image 12
Onkyo TX-NR717 instruction manual Connecting the AV Receiver, En-12, Connecting Your Speakers, Speaker Configuration