101
Administration of the Gigaset SE505 dsl/cable
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / admin_router.fm / 16.07.2003
Wireless
The Wireless screen displays the following information:
Service Set
Identifier (SSID)
Your router is identified in the wireless local network by this
identifier. You must use this SSID for all additional PC's which you
wish to log on to your router.
You can change this ID in the Advanced Setup using the Wireless
Settings - Basic Settings option.
Channel Number The channel on which your router communicates with the PC's
which are connected to it wirelessly. You can set the channel
number in the Advanced Setup with the Wireless Settings -
Basic Settings option.
DHCP Server The DHCP Server of the router automatically assigns dynamic IP
addresses to the PC's in the local network when it is activated.
This shows whether the DHCP Server is enabled or disabled.
You can change this setting in the Advanced Setup with the LAN
- DHCP Server option.
Internal Router IP
Address
Shows the Private IP address of your router in the local network.
This is different from the IP address which your router has on the
Internet (Public IP address). The default internal IP address for the
router is 192.168.2.1.
You can change this setting in the Advanced Setup with the LAN
- Private IP address option.
Subnet Mask Indicates the router's Subnet mask. All PC's that are connected to
the router must use this subnet mask.