
Configuration with Advanced Setup
LAN Configuration
You can use LAN configuration to
◆define an IP address for the router (see below),
◆enable or disable the router's UPnP functionality (see page 77) and
◆configure the router's DHCP server (see page 78).
Defining the router's private IP address
You can change the router's IP address in this screen. The default IP address for the router is 192.186.1.1. This is the router's Private IP address. This is the address under which the router can be reached on the local network. It can be freely assigned from the block of available addresses. The IP address under which the router can be reached from outside is assigned by the Internet Service Provider.
◆In the LAN menu, select Private IP address.
◆If you want to assign the router a different IP address, enter it in IP Address.
i
We recommend using an address from a block that is reserved for private use. This address block is 192.168.2.1 - 192.168.255.254.
◆The Subnet mask is 255.255.255.0 by default. We advise that you do not change this setting.
◆Click on APPLY to apply the settings.
73