Configuring the local network

Network configuration with Windows 2000

To integrate a PC with Windows 2000 into a network that is configured with a Gigaset SE505 dsl/cable:

1.Install the network services (see below).

2.Select computer names and workgroup (see page 37).

3.Install the TCP/IP protocol (see page 38).

4.Make TCP/IP protocol settings (see page 40).

5.Deactivate the http proxy (see page 42).

6.Synchronise the TCP/IP settings to the Gigaset SE505 dsl/cable (see page 43).

Installing network services

You have to install the network services before the PCs in your network can access shared resources. This is done as follows:

1.Click on Start Settings Control Panel.

Double click on the Network and dial-up connections icon.

In the left-hand pane click on Add Network Components.

36

Page 37
Image 37
Siemens SE505 manual Network configuration with Windows, Installing network services