The Gigaset SE505 dsl/cable
Procedure for installation and configuration
1.First install an Ethernet network card or a wireless Network adapter such as the Gigaset PCI Card 54 or Gigaset PC Card 54 in the PC's you want to connect with the Gigaset SE505 dsl/cable. The installation procedure can be found in the product's User Guide.
i
When installing wireless network adapters you should note the following:
The default SSID of the Gigaset SE505 dsl/cable is ConnectionPoint.
2.Now install the router (refer to the section entitled "Installing the Gigaset SE505 dsl/ cable" on page 13).
3.Before the PC's can communicate with the router and with each other in a local network, you have to change their network settings. Configure these network settings on one PC first so that it can establish a connection to the router. You can then use that PC to configure the router. To find out how to do this, refer to "Configuring the local network" on page 18.
4.In a wireless connection you establish the link from the PC's wireless network adapter to the router. This is described in the network adapter's operating instructions.
5.Now configure the router to activate the router's Internet access (refer to the section "General configuration with Basic Setup" on page 52).
This will require the access data from your Internet Service Provider.
6.If you want to connect more PC's to the router, configure their network settings to set up the local network (refer to the section entitled "Configuring the local network" on page 18).
7.If you wish to use the router's other functions, e.g. the comprehensive security features, use the router's Security Setup (see page 63) or Advanced Setup (see page 70).
8
