Configuring the local network

Synchronising the TCP/IP settings with the Gigaset SE505 dsl/cable

You have now configured your PC so that it is ready to be connected to the Gigaset SE505 dsl/cable. You now have to release the old TCP/IP settings and match them to the settings of your Gigaset SE505 dsl/cable.

Click on Start Run.

Type WINIPCFG and click on OK.

There may be a slight delay before the IP Configuration appears.

Select your network adapter from the selection list.

Click on Release and then Update.

If the router's default IP address (192.168.2.1) was not changed, the IP address should now read 192.168.1.x (x being a number between 2 and 254). The Subnet Mask must always be 255.255.255.0 and the Default Gateway must have the router's IP address (192.168.2.1). These values confirm that your Gigaset SE505 dsl/ cable is working.

Click on OK to close the IP Configuration window.

27

Page 28
Image 28
Siemens SE505 manual Configuring the local network