Siemens SE505 manual Installing the TCP/IP protocol

Models: SE505

1 135
Download 135 pages 6.18 Kb
Page 22
Image 22

Configuring the local network

Installing the TCP/IP protocol.

The TCP/IP protocol ensures that the PC's in the network can communicate with each other. You must first install this Protocol for the network adapter that establishes the connection to the Gigaset SE505 dsl/cable.

In the Network window move from the Identification tab to the Configuration tab.

In the Network window, check that there is a TCP/IP -> entry for your network card or network adapter in the list of components. If you are using a Gigaset PCI Card 54 as the wireless network adapter for example, then there must be an entry called TCP/IP -> Siemens Gigaset PCI Card 54.

If the entry does not exist, click on Add.

Select Protocol as the network component type and click on Add.

In Manufacturers select Microsoft and in Network Protocols select TCP/IP before confirming with OK.

21

Page 22
Image 22
Siemens SE505 manual Installing the TCP/IP protocol