Configuration with Advanced Setup
◆SSID
Before the wireless network components can communicate with each other, you must use the same SSID (Service Set Identifier).
The Gigaset SE505 dsl/cable comes supplied with the SSID configured as ConnectionPoint. You should change this SSID for security reasons.
Enter a character string of your choice. The SSID is case sensitive. It can be up to 32 alphanumerical characters long.
i
◆Remember that the connection to the wireless network adapters will be interrupted until you enter the new SSID on them as well.
◆You will find a detailed example of how to change the SSID in "Practical Tips and Configuration Examples"on the CD supplied.
◆SSID visible
If this option is enabled, the Gigaset SE505 dsl/cable will send the SSID in all data transmissions, and your router's SSID will be displayed on PC's that have a wireless network adapter. In this case eavesdroppers could use the SSID to gain access to your network.
Your router's SSID will not be displayed if you disable the SSID option. This will increase protection against unauthorised access to your wireless network. Make a note of the SSID however - you will need it to log your PC onto your router.
◆Wireless Channel
Channel used by the Gigaset SE505 dsl/cable to communicate with other wireless network components. You must use a common channel so that the wireless network components can communicate with one another.
i
The available channel settings are governed by your country's regulations. They define the number of available channels. The default setting is determined by the country setting (see page 52). You should not change this setting unless you have a good reason to do so.
◆Access point name
You can enter a name for your router here. This name will be used if you want to do Roaming with your router. If you do not need Roaming, you leave the default name as it is.
◆BSSID
The router's BSSID is displayed here. This is for information only – it cannot be changed.
70
