Onkyo TX-NR717 En-83, Zone 2/3, Music Server and Internet Radio, RI Dock for iPod/iPhone

Make sure you’ve selected the correct remote	11, 77
controller mode.
When using the remote controller to control other	—
manufacturers’ AV components, some buttons may
not work as expected.
Make sure you’ve entered the correct remote control	76
code.
Make sure to set the same ID on both the AV receiver	69
and remote controller.

■ Can’t control other components

If it’s an Onkyo component, make sure that the u	18
cable and analog audio cable are connected properly.
Connecting only an ucable won’t be enough.
Make sure you’ve selected the correct remote	11, 77
controller mode.
If you’ve connected an cassette tape deck to the	46
TV/CD IN jack, or an RI Dock to the TV/CD IN or
GAME IN jacks, for the remote controller to work
properly, you must set the input display
appropriately.
If you cannot operate it, you will need to enter the	75
appropriate remote control code.
To control another manufacturer’s component, point	76
the remote controller at that component.
To control an Onkyo component that’s connected via	77
u, point the remote controller at the AV receiver.
Be sure to enter the appropriate remote control code
first.
To control an Onkyo component that’s not connected	77
via u, point the remote controller at the component.
Be sure to enter the appropriate remote control code
first.

The entered remote control code may not be correct. — If more than one code is listed, try each one.

Make sure your iPod/iPhone is properly inserted in	—
the Dock.
Make sure the AV receiver is turned on, the correct	—
input source is selected, and the volume is turned up.
Make sure the plugs are pushed in all the way.	—
Try resetting your iPod/iPhone.	—

■ There’s no video

Make sure that your iPod/iPhone model’s TV OUT — setting is set to On.

Make sure the correct input is selected on your TV or — the AV receiver.

Some versions of the iPod/iPhone do not output	—
video.

■The AV receiver’s remote controller doesn’t control my iPod/iPhone

Make sure your iPod/iPhone is properly inserted in	—
the Dock. If your iPod/iPhone is in a case, it may not
connect properly to the Dock. Always remove your
iPod/iPhone from the case before inserting it into the
Dock.
The iPod/iPhone cannot be operated while it’s	—
displaying the Apple logo.
Make sure you’ve selected the right remote mode.	74
When you use the AV receiver’s remote controller,	—
point it toward your AV receiver.
If you still can’t control your iPod/iPhone, start	—
playback by pressing your iPod/iPhone model’s Play
button. Remote operation should then be possible.
Try resetting your iPod/iPhone.	—
Depending on your iPod/iPhone, some buttons may	—
not work as expected.

Appendix

■The AV receiver unexpectedly selects my iPod/iPhone as the input source

Always pause iPod/iPhone playback before selecting — a different input source. If playback is not paused, the Direct Change function may select your iPod/iPhone

as the input source by mistake during the transition between tracks.

■iPod/iPhone doesn’t work properly

Try reconnecting your iPod/iPhone. —

Zone 2/3

■There’s no sound

Only components connected to analog inputs can be — played in Zone 2/3.

■The Zone 2/3 speakers produce no sound

If the “Speakers Type(Front)” setting is set to other 55 than “Normal”, Powered Zone 2/3 cannot be used.

Music Server and Internet Radio

■Can’t access the server or Internet radio

Check the network connection between the AV	96
receiver and your router or switch.
Make sure that your modem and router are properly	—
connected, and make sure they are both turned on.
Make sure the server is up and running and	97
compatible with the AV receiver.
Check the “Network”settings.	68

■Playback stops while listening to music files on the server

RI Dock for iPod/iPhone

■There’s no sound

Make sure your iPod/iPhone is actually playing. —

En-83

Make sure your server is compatible with the AV	97
receiver.