HOW TO START THE PYROLYSIS CYCLE
Important: the pyrolysis cycle must only be performed with the oven empty; so, before starting the cycle take all the accessories (shelves, baking/grill tray and anti- grease filter) out of the oven cavity and dry any traces of overflowed liquid.
I | I | I | |
I |
|
| I |
I |
|
| I |
I |
| I | I |
I | I |
| |
|
| ||
|
|
| |
3
Do not use any degreasing products (e.g. degrea- sing sprays, detergents, etc.).
1.Close the oven door (if it is open or not closed properly the pyrolysis cycle will not start).
2.Turn the oven selector knob to the pyrolysis position (P); P0•00 appears on the electronic pro- grammer display with the letter P flashing.
3.Press pushbutton 3 on the programmer to start the cycle.
This combined confirmation operation offers greater safety when there are children; in fact turning the knob to the pyrolysis function has no effect if key 3 of the programmer is not then pressed.
■■ P1•30 (pyrolysis time, 1 hour and 30 minutes) appears and the door is locked.
■■ On the control panel the pilot light with the key lights up to indicate that the door is locked.
4.To increase the pyrolysis cycle time (max 3 hours) press key 2 of the programmer then key 6. To go backwards to the minimum of 1 hour and 30 minu- tes press key 2 then key 5.
■■ During the setting AUTO flashes and P disap- pears.
5.The pyrolysis cycle starts immediately and is com- pleted in the programmed time.
■■ Throughout the pyrolysis cycle the programmer displays the time (hours and minutes) remaining until the cycle is finished.
2 | 5 | 6 |
VERY IMPORTANT:
The pyrolysis only starts with the oven door closed. If the door is open or not closed properly the oven CANNOT perform the pyrolysis; electronic safety devices prevent the pyrolysis from starting.
23
