DeLonghi DE609MP manual What to do

PROBLEMS ON STARTING AND DURING THE PYROLYSIS CYCLE

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I	I
	I
I	I
I	I
I	I
I I

II

I

I

I

I

I

I I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I I I

I

I	I
	I
I	I
I	I
I	I
I I

1.Steady door

The function selector has been turned to the pyrolysis position with the oven door open or not perfectly closed. Or the door has been opened before the cycle has been started with confirmation from key 3

What to do:

Close the door and repeat the operations to start the cycle.

■■ If after 5 minutes the door has not been closed door flashes

I	and an audible signal sounds for 30”.
	What to do:
	Close the door, press any programmer key to silence the audible
	signal and repeat the operations to start the cycle.

2.door with AUTO flashing

The oven door has been opened after the pyrolysis cycle has started. The pyrolysis cycle is zeroed.

What to do:

1.Close the door. P0•00 appears on the electronic programmer display with the letter P and AUTO flashing.

2.Turn the function selector to 0 and repeat the operations to start the cycle.

■■ If after 5 minutes the door has not been closed door flashes and an audible signal sounds for 30”.

What to do:

Close the door, press any programmer key to silence the audible signal and repeat the operations to start the cycle.

3.F0.00 with AUTO flashing

The pyrolysis cycle has been stopped and then started again when it was quite a way through. The message is displayed after about 10 minutes and the pyrolysis cycle is zeroed.

What to do:

1.Turn the function selector knob to 0.

2.Wait for at least 15 minutes.

3.Repeat the operations to start the Pyrolysis cycle.

4.If after several attempts the message continues contact the After-Sales Service Centre.

Caution: It is advisable not to stop the pyrolysis cycle and then start it again when it is quite a way through.

24