DeLonghi DE609MP Selecting The Cooking Function, Setting The Cooking Temperature, Switching Off

SETTING THE COOKING (ONLY FOR THE COOKING FUNCTIONS)

Way 1: SETTING THE COOKING TEMPERATURE WITH THE TEMPERATURE KNOB (POTENTIOMETER)

P

A

U

T

O

		Figure 14
Function	Temperature knob
selector knob	(potentiometer)

NOTE: The temperature knob (potentiometer) turns to right and left only to symbols + and -. Forcing the turning could irreparably damage the temperature knob.

	I	I
I
I
I
	I	I

I

I

I

I

I

I

The temperature set is shown on the electronic pro- grammer display and can be varied, with 5 °C intervals, by turning the potentiometer knob.

During the cooking the oven temperature is measured by a sensor inside the cavity and is shown on the pro- grammer display.

1.SELECTING THE COOKING FUNCTION

Turn the selector knob to the cooking function required.

The pre-set temperature appears on the program- mer display. °C flashes on the display for 3 seconds.

The heating elements start cooking immediately.

2.SETTING THE COOKING TEMPERATURE

Turn the potentiometer knob clockwise to increa- se the temperature or anticlockwise to reduce it.

The maximum temperature which can be set is 250°C while the minimum temperature is 50 °C.

Note: When °C becomes steady the value shown on the display indicates the oven cavity tempera- ture.

Caution: If a temperature below the minimum value (50 °C) is set the system switches off automatically and OFF appears. In this case repeat the procedure from point 2.

3.SWITCHING OFF

Turn the selector knob to position 0 (oven OFF).

The programmer display shows the time.

21