ERROR CODES

The error codes printed both on the transmission report and the activity report consist of two digits indicating the cause of the error. To save space, the two-digit code without any message is printed on the activity report.

CODE

MESSAGE

CAUSE OF ERROR

WHAT TO DO

 

 

 

 

OK

No message. Operation performed

 

No action.

 

successfully.

 

 

 

 

 

 

02

IMPOSSIBLE CONNECTION

The fax machine does not detect any

Check that the fax machine is correctly

 

 

dialling tone or receives an irregular signal.

connected to the telephone line and that the

 

 

 

handset is not off the hook. Then try

 

 

 

connecting again.

 

 

 

 

03

RECEIVER DOES NOT ANSWER

The correspondent is not answering or is a

Check that the correspondent’s number is

 

 

fax machine.

correct.

 

 

 

 

04

ERR. WHILE TRANSMITTING

An error occurred during transmission. "nn"

Resume transmission from the page indicated

 

RESEND FROM PAGE: nn

= number of page on which the error was

in the report.

 

 

found.

 

 

 

 

 

05

RESEND PAGES:

The correspondent’s fax machine found

Resume transmission of the pages indicated in

 

nn, ..... nn

errors during reception. "nn" = number of

the report.

 

 

page on which the error was found.

 

 

 

 

 

07

DOCUMENT TOO LONG

The document to be sent is too long. The

Split up the document to be sent.

 

 

time taken to send it exceeds the allowed

 

 

 

limits.

 

 

 

 

 

08

CHECK THE DOCUMENT

The optical reader cannot read the

Remove the document from the ADF and

 

 

document.

reinsert it when it tries to connect.

 

 

 

 

09

STOP PRESSED

You aborted transmission.

No action.

 

 

 

 

10

No message

An error occurred during reception.

Call the correspondent and ask him to send

 

 

 

you the document again.

 

 

 

 

11

No message

During reception, a printing error occurred.

Correct the fault and wait for the document in

 

 

Reception continued in the memory but the

the memory to be printed.

 

 

space left in the memory was filled before

 

 

 

reception was completed.

 

 

 

 

 

13

ERRORS WHILE POLLING

The correspondent did not leave any

Call back the correspondent.

 

 

document in the ADF and did not set up his

 

 

 

fax machine for polling transmission.

 

 

 

 

 

16

POWER FAILURE ON PAGE nn

A power failure occurred during

Resume transmission from the page indicated

 

 

transmission or reception.

in the report.

 

 

 

 

(OK)

No message

The document was received but the printing

Call the correspondent.

 

 

quality is unsatisfactory.

 

 

 

 

 

OCC

LINE BUSY

The line is busy.

Retry when the line is free.

 

 

 

 

31

Page 37
Image 37
Olivetti 450, 490 manual Error Codes, Code Message Cause of Error What to do