TO DISPLAY THE CALLER ID
This function, which may be activated by the telephone company on request by the user, is only available in some countries and conforms to the ETSI ETS 300
This function tells you immediately who is calling. In this way, you will be able to decide whether to answer the call or not.
When this function is enabled, if the fax machine is instand- by mode, whenever a call is received, it always shows one of the following items of information:
•number or name of the correspondent who called you;
•PRIVATE: if the correspondent has chosen not to reveal his identity to you;
•NOT AVAILABLE: if the correspondent is connected to a telephone exchange that does not support this service.
If you are programming your fax machine and, when an incoming call is received, want to know who is calling
you, you must press the 
key before answering the call.
It may however happen, if you are connected to a particu- lar kind of telephone network, that the number of the caller is not displayed on the fax machine. If this happens, call your local customer engineering service centre.
The fax machine is already set up to display the caller ID. You may however set it up not to display it, as follows:
Until the display shows:
INSTALLATION
The display shows:
TEL. LINE SETU-UP
The display shows:
ENHANCED FEATUR.
Until the display shows:
CALLER ID: ON
/} To view the other available option: "CALLER ID: OFF".
To confirm your choice.
To return the fax machine to the initial
NOTE
With this function enabled, if a power failure occurs and the date and time are lost, they will be restored when the next call is received.
TO CHANGE THE NUMBER OF RINGS
This function is only enabled in some countries.
If set in "PHONE/FAX" or "TAD/FAX" reception mode, when an incoming call is received, the fax machine automatically recognizes, aftertworings, whether the call is being made from another fax machine (FAX) or a telephone (TEL).
If you want, you can change the number of rings, as fol- lows:
Until the display shows:
INSTALLATION
Until the display shows:
RING COUNT:02
/} To view the other available values: "01", "04", "06", "07" and "08". For example: "04".
To confirm your choice.
To return the fax machine to the initial
TO CHANGE THE RING VOLUME
Until the display shows:
FAX
The display shows:
DATE AND TIME
The display shows:
VARIOUS SETTINGS
Until the display shows:
RING VOLUME:HIGH
/} To view the other available options: "RING VOLUME:LOW", "RING VOLUME: MED" and "RING VOLUME:OFF". For example: "RING VOLUME: MED".
To confirm your choice.
To return the fax machine to the initial
25
