Olivetti 450, 490 Remote Starton, Type Code, CODE0/9,* *8, Other Useful Transmission Settings

TO CHANGE THE REMOTE CONTROL CODE

If the fax machine is connected to anextension that oper- ates in tone dialling mode and is set up for manual reception, whenever there is a call from a correspondent wishing to send you a document, you canset it to receive the document by typing the code** on the extension. This

operation has the same effect as pressing the key on the fax machine.

You can replace the second "asterisk" of this code using digits from 0 to 9.

If the fax machine is connected to an external answering machine, we recommend you choose a different digit from the one used to control the machine from a remote location.

Until the display shows:

INSTALLATION

The display shows:

TEL. LINE SET-UP

The display shows the line to which the fax machine was set to be connected, for example:

PUBL.LINE (PSTN)

Until the display shows:

REMOTE START:ON

The display shows the code you set previously, for ex- ample:

TYPE CODE

CODE(0/9,*) *8

- Type the new code, for example: "*9".

To confirm your choice.

To return the fax machine to the initial stand-by mode.

NOTE

If you want to disable this function, after the fourth step, press the /} keys to display: "REMOTE START:OFF", then press

the key to confirm and the key to return the fax machine to the initial stand-by mode.

nOTE

If you are connected to a private line, follow the same proce- dure until the display shows "PUBL.LINE (PSTN)", press the /} keys to display: "PRIV.LINE (PBX)" and then con- tinue as described in the procedure.

OTHER USEFUL TRANSMISSION SETTINGS

TO CHANGE THE POSITION OF YOUR NAME AND FAX

NUMBER

The information in the heading of the document to be sent (name, fax number, date and time and number of pages) may be received by your correspondent's fax machine outside the text area immediately below the top edge of the sheet or inside the text area, slightly lower down than in the previous case.

Your fax machine is designed to send this information inside the text area.

To change the position

Until the display shows:

FAX SET-UP

The display shows:

DATE AND TIME

The display shows:

VARIOUS SETTINGS

Until the display shows:

HEADER INSIDE

/} To select the alternative parameter.

HEADER OUTSIDE

To confirm the setting.

To return the fax machine to the initial stand-by mode.

TO ENABLE/DISABLE REPETITION OF A FAILED

TRANSMISSION FROM THE MEMORY

Until the display shows:

FAX SET-UP

The display shows:

DATE AND TIME

The display shows:

VARIOUS SETTINGS

Until the display shows:

RETRANS.DOC.:OFF

/} To view the other available option: "RETRANS. DOC.: ON".

To confirm your choice.

To return the fax machine to the initial stand-by mode.

27