TO REGULATE THE RESOLUTION
Until the desired resolution value appears on the display.
The resolution should be regulated on the basis of the following criteria:
•STD (STANDARD), if the document contains easily leg- ible characters. An "arrow" appears on the bottom line of the display in line with the " 
" symbol printed on the console.
•FINE, if the document contains very small characters or drawings. An "arrow" appears on the bottom line of the display in line with the " 
" symbol printed on the console.
•HALF TONES, if the document contains shaded areas.
An "arrow" in line with the "
" symbol and an arrow in line with the " 
" symbol printed on the console appear on the bottom line of the display.
TO SEND A DOCUMENT
Place the document in the ADF. The display shows on the top line:
DOCUMENT READY
and on the bottom line, the default contrast value: NOR- MAL.
The initial resolution value is: " 
" (standard).
If you want, change the contrast and resolution values as described previously.
-
)
To start sending the document.
If the document is sent correctly, once this operation has been completed, the display will show the message "TX COMPLETED" for a few seconds.
note
If you have entered any incorrect digits: position the cursor, using the /} keys, to the incorrect digit and overwrite it with the correct one; if you want to delete the number altogether,
press the 
key.
note
If you want you can dial the correspondent’s number us- ing the quick dialling procedures, see "To set
note
If you want to abort the transmission in progress, press
the 
key. The fax machine unloads the document from
the ADF and returns to the initial
If the document to be removed consists of more than one
sheet, before pressing 
to unload the first, remove all the others by hand.
TO HEAR THE DIALLING TONE WHEN SENDING A DOCUMENT
Place the document in the ADF. The display shows on the top line:
DOCUMENT READY
and on the bottom line, the default contrast value: NOR- MAL.
The initial resolution value is: " 
" (standard).
If you want, change the contrast and resolution values as described previously.
To hear the dialling tones. The display shows:
OFF HOOK
And the length of the transmission in minutes and seconds in the top
-
)
As soon as you hear the tone of your correspondent’s fax
machine, press 
to start sending the document. The message "CONNECTING" appears on the display.
If the document is sent correctly, once this operation has been completed, the display will show the message "TX COMPLETED" for a few seconds.
TO SEND A DOCUMENT WITH THE RECEIVER RAISED
Place the document in the ADF. The display shows on the top line:
DOCUMENT READY
and on the bottom line, the default contrast value: NOR- MAL.
The initial resolution value is: " 
" (standard).
If you want, change the contrast and resolution values as described previously.
Lift the receiver to engage the line. The display shows:
OFF HOOK
And the length of the transmission in minutes and seconds in the top
-
)
If your correspondent’s fax machine is set up for auto- matic reception, you will hear the fax machine signal. If it is set up for manual reception, the correspondent himself will answer so you can ask him to press the start key on his fax machine, after which you will hear the fax machine signal.
To start sending.
If the document is sent correctly, once this operation has been completed, the display will show the message "TX COMPLETED" for a few seconds.
13
