Olivetti 490, 450 Delayed TX, Type Time Hhmm, Type FAX Number NUM/TOUCH/SPEED, Automatic TX AT

AUTOMATIC REDIAL

If no connection is established due to line errors or because the correspondent’s number is busy, the fax machine automatically redials the number of times laid down by the legislation in your country.

TO SEND A DOCUMENT AT A PRESET TIME (DELAYED TRANSMISSION)

This function enables you to solve time zone problems if your correspondent is located thousands of kilometres away and to avoid paying high prices by choosing time bands when there is less traffic on the telephone lines.

Place the document in the ADF. The display shows on the top line:

DOCUMENT READY

and on the bottom line, the default contrast value: NOR- MAL.

The initial resolution value is: " " (standard).

If you want, change the contrast and resolution values as described previously.

Until the display shows:

DELAYED TX

The display shows:

TYPE TIME

HH:MM

- Enter the time at which you want to send the document. For exemple "16:50".

The display shows:

TYPE FAX NUMBER

NUM/TOUCH/SPEED

- Dial your correspondent’s number in any of the available methods: directly on the numeric keypad or using the one- touch keys ( -) or speed dialling codes (see "To set one-touch and speed dialling").

To confirm the setting. The display shows "TX SET" for a few seconds and then:

AUTOMATIC

TX AT 16:50

note

You can delete the "broadcast transmission" setting by remov-

ing the document from the ADF or pressing the key.

note

If there is a power failure, the broadcast transmission will be cancelled.

TO CHANGE/DELETE A BROADCAST TRANSMISSION THAT IS

ALREADY SET

Until the display shows:

DELAYED TX

The display shows:

ALREADY ENTERED

The display shows:

CHANGE PARAM.?

If you want to delete the transmission set, press the /} keys: the display shows the message "CANCEL SET-

TING?", then press to confirm deletion. The fax machine automatically returns to the initial stand-by mode.

If you want to change the time at which the document is to be sent or the number of the correspondent to whom you want to send the document, take the following steps:

The display shows:

TYPE TIME

16:50

- Overwrite with the new time and then confirm the setting by

pressing the key or confirm the existing time by press-

ing the key. The display shows:

TYPE NUMBER

If you want to restore the current time, press the key,

the key and take the following step.

- Overwrite with the new number and confirm the setting by

pressing the key or

press the key, type the new number and confirm the

setting by pressing the key or

confirm the existing one by pressing the key straight away.

The display shows:

AUTOMATIC

TX AT 18:00

TO SEND A DOCUMENT TO SEVERAL CORRESPONDENTS

The fax machine's memory allows you to send a document (even at a preset time: "Delayed transmission") to several correspond- ents (max. 10): "Broadcast transmission". See "To send a docu- ment from the memory".

14