To SET the Date and Time, To ADD Paper | Olivetti 450, 490 instruction

TO SET THE DATE AND TIME

Thefirst time you connect the fax machine to the power supply or whenever there is a power failure you must set the date and time as described below.

Once set, the date and time can be changed at any time, see the "To change the date and time" section.

The display shows:

DATE AND TIME

The display shows:

FORMAT: DD/MM/YY

/} If you want to select a different format from the one dis- played.

The display shows:

FORMAT: 24 H

/} If you want to select the other time format (12-hour). The display shows:

DD/MM/YY HH:MM

25-03-04 11:23

- Enter the new date and time (e.g. 26-03-04; 12:00). As each digit is entered, the cursor will move to the next one.

DD/MM/YY HH:MM

26-03-04 12:00

/} If you only want to change a few digits, move the cursor to them using the /} keys and overwrite them with the correct digits.

To confirm the setting. The date and time setting procedure

has been completed. The new date and time will be up- dated automatically and will be printed on each page sent.

To return the fax machine to the initial stand-by mode. Re-

member that the stand-by mode is the status in which it is idle and that it is the mode from which the machine can be programmed.

note

If you have chosen the 12-hour time format, the display will show the letter "p" (post meridiem) or the letter "a" (ante meridiem). To switch from one letter to another, move the cursor to the letter to be changed, using the /} keys, and

press the key.

If you think you have made a mistake or want to abort the

procedure in progress for any reason, press the key.

TO ADD PAPER

1.Push the Automatic Sheet Feeder (ASF) into the slots until it clicks into position.

2.Open the panel of the automatic sheet feeder, as indicated by the arrow.

3.Holding the sheets by their upper edge, insert them by letting them "drop" into the ASF without folding or forcing them.

4.Close the panel of the automatic sheet feeder, as indicated by the arrow.

5.Push the sheets against the left side of the ASF using the adjusting lever.

notE

If you add sheets to the ASF, make sure you place them under and not on top of those already present.

notE

The fax machine has a memory that enables it to receive up to 50 pages even if you do not add any paper.

TO CHECK THE PRINT FORMAT SET ON THE FAX MACHINE

Once you have manually adjusted the automatic sheet feeder (ASF), to ensure that the fax machine works properly, check that the printing format set on the fax machine corresponds to the size of paper you intend to use.

Until the display shows:

FAX SET-UP

The display shows: