Onkyo TX-NR717 instruction manual En-39, Speaker Layout, Input Source

			Turning On & Basic Operations
	Speaker Layout	N*1	B
	The illustration shows which speakers are activated in each
	channel. See “Speaker Configuration” for the speaker
SP (speaker layout)	setup (➔ page 55).
	Z
			b
Listening mode
buttons
	X
Input Source			V
The following audio formats are supported by the listening
modes.
A This is mono (monophonic) sound.
S This is stereo (stereophonic) sound. Two
independent audio signal channels are reproduced	C
through two speakers.

D This is 5.1-channel surround sound. This surround	*1	Pressing RECEIVER followed by SP (speaker layout)
		repeatedly allows you to select the speakers you want to use:
system has five main channels of sound and a sixth
		front high, front wide, or surround back. However, the
subwoofer channel (called the point-one channel).
F This is 7.1-channel surround sound. This is a		available speakers depend on the settings of
		“Speaker Configuration” (➔ page 55),
further sound enhancement to 5.1-channel sound
with two additional speakers that provide greater
sound envelopment and more accurate positioning
of sounds.

GThis is DTS-ES surround sound. This surround system can produce a discrete or a matrix-encoded sixth channel from existing DTS 5.1 encoded material.

HThis is Dolby Digital EX surround sound. This provides a center back surround channel from 5.1- channel sources.

En-39