Lexmark T622, T620 setup guide Installing a 5-bin mailbox

Installing a 5-bin mailbox

Mailbox

Labels

Bracket	Lexmark T Family
	label

The 5-bin mailbox is shipped with a sheet of labels and a plastic bracket for attaching a paper bail.

After you carefully unpack the mailbox, install it immediately; otherwise, the edges of the mounting brackets could damage tabletops or fabrics.

Warning! The 5-bin mailbox is designed to hold the weight of print material only. Do not use it as a shelf; excess weight may damage it.

1 Remove the top cover from the printer, fin- isher, output expander, or previously installed mailbox.

Note: If you have purchased a finisher or a high- capacity output stacker, that output option must be installed directly on the printer, before the mailbox.

2 Slide the plastic bracket onto the static brush holder, located on the bottom of the 5- bin mailbox.

Note: If the mailbox will be the topmost output option, remove the paper bail from the bracket on the top cover and store in a safe place.

13