Installing an option card
MarkNet internal print server | MarkNet N2501e or N2401e |
Tri-Port adapter
USB/Parallel | hard disk with adapter |
Warning! Electronic components are easily damaged by static electricity. Touch something metal on the printer before you touch the card.
Connector 1
Connector 2
Your printer has two connectors that support the following option cards:
•Hard disk with adapter card
•MarkNet™ internal print server
•USB/Parallel
•Parallel
•Coax/Twinax Adapter for SCS
•
Refer to the documentation included with each card for detailed information about that specific card.
You need a small Phillips screwdriver to install these options.
Note: The Lexmark T622n model ships with an Ethernet print server already installed.
1 Follow the steps in “Accessing the printer system board” beginning on page 17.
2 Locate the card connectors on the system board. If you are installing only one card, install it in connector 1. If you are installing two cards on a model with multiple connectors, use connector 1 first and then connector 2.
3 Locate the two screws on the back of the printer that attach the metal plate to the slot.
4 Remove and save the two screws. Remove and discard the plate.
5 Unpack the card. Save the packaging materials.
21