Lexmark T622, T620 setup guide Installing an output expander

3 Place the tips of the wire paper bail into the ends of the plastic bracket so that the bail curves downward.

The bail rests in the printer output tray.

4 Attach the top cover to the finisher.

Plastic bracket

Wire paper bail

	Installing an output expander	Each output expander consists of the expander
		and a removable tray. A paper bail, bracket, and
Tray	Lexmark T Family	labels are also included.
	label

After you carefully unpack the output expander, install it immediately; otherwise, the edges of the mounting brackets could damage tabletops or fab- rics.

Labels

Output expander

Bracket and bail

Warning! The output expander tray is designed to hold the weight of print material only. Do not use it as a shelf; excess weight may cause it to disengage from the output expander.

1 Remove the top cover from the printer, fin- isher, or high-capacity output stacker.

Note: If you have purchased a finisher or a high- capacity output stacker, that output option must be installed directly on the printer, before the output expander.

11