Installing a finisher The finisher is shipped with a staple cartridge already installed.
After you carefully unpack the finisher, install it immediately; otherwise, the edges of the mounting brackets could damage tabletops or fabrics.
Lexmark T Family label (colored triangle)
Warning! The finisher tray is designed to hold the weight of print material only. Do not use it as a shelf; excess weight may damage it.
Mounting slot
Mounting bracket
1 Remove the top cover or any previously installed output options from the printer.
Note: The finisher must be positioned directly above the printer and below other output options. It cannot be used with the high- capacity output option.
2 Insert the mounting brackets into the slots on top of the printer. Make sure the finisher is seated securely.
10
