Onkyo TX-NR717 En-94, How to connect and setup, Confirm the connection and settings

■How to connect and setup

1 Confirm the connection and settings.

1.Connect the HDMI OUT MAIN jack to the HDMI input jack of the TV.

Blu-ray Disc/DVD player, etc.

		HDMI
		connection
	AV receiver
DIGITAL AUDIO			HDMI
connection			connection
(OPTICAL)

TV, projector, etc.

2.Connect the audio output from the TV to the OPTICAL IN 2 jack of the AV receiver using an optical digital cable.

Note

•When the audio return channel (ARC) function is used with an ARC capable TV, this connection is not necessary

(➔ page 67).

3.Connect the HDMI output of the Blu-ray Disc/DVD player/recorder to the HDMI IN 1 jack of the AV receiver.

Note

•It is necessary to assign the HDMI input when connecting the Blu-ray Disc/DVD player/recorder to other jacks (➔ page 53). Do not assign an HDMI IN to the TV/CD selector at this time, otherwise appropriate CEC (Consumer Electronics Control) operation will not be guaranteed.

2

3

			Appendix
Change each item in the “HDMI” menu according	4 Operate with the remote controller.
to the following settings:		For buttons that can be operated (➔ page 78).
• HDMI Control(RIHD): On
		Note
• Audio Return Channel (ARC): Auto
		• Audio from DVD-Audio or Super Audio CD may not output
See details of each setting (➔ page 67).
		from the TV speakers. You will be able to output the audio
Confirm the settings.		from the TV speakers by setting the audio output of the
1. Turn on the power for all connected components.		DVD player to 2ch PCM. (It may not be possible depending
		on the player models.)
2. Turn off the power of the TV, and confirm that the
		• Even if you set to output audio on the TV speakers, audio
power of the connected components is turned off
		will be output from the speakers connected to the AV
automatically with the link operation.
		receiver when you adjust the volume or switch the input on
3. Turn on the power of the Blu-ray Disc/DVD		the AV receiver. To output audio from the TV speakers, re-
player/recorder.		do the corresponding operations on the TV.
4. Start playback on the Blu-ray Disc/DVD		• In case of an pconnection with uand uaudio
player/recorder, and verify the following:		control compatible components, do not connect the u
• The AV receiver automatically turns on, and		cable at the same time.
		• On the TV, when you select anything other than the HDMI
selects the input to which the Blu-ray
		jack to which the AV receiver is connected, the input on the
Disc/DVD player/recorder is connected.
		AV receiver will be switched to “TV/CD”.
• The TV automatically turns on, and selects the
		• The AV receiver will automatically power on in conjunction
input to which the AV receiver is connected.
		when it determines it to be necessary. Even if the AV
5. Following the operating instructions of the TV,
		receiver is connected to an pcompatible TV or
select “Use the TV speakers” from the menu
		player/recorder, it will not power on if it is not necessary. It
screen of the TV, and confirm that the audio is		may not power on in conjunction when the TV is set to
output from the speakers of the TV, and not from		output audio from the TV.
the speakers connected to the AV receiver.		• Linked functions with the AV receiver may not work
		depending on the component model connected. In such
6. Select “Use the speakers connected from the AV
		cases, operate the AV receiver directly.
receiver” from the menu screen of the TV, and
confirm that the audio is output from the speakers
connected to the AV receiver, and not from the
TV speakers.

Note

•Perform the above operations when you use the AV receiver for the first time, when the settings of each component are changed, when the main power of each component is turned off, when the power cable is disconnected from the power supply, or when there has been a power outage.

En-94