Onkyo TX-NR535 manual Playing the player and TV, Remote controller parts name

Step 3: Playing

1 Playing the player and TV

Press RCV on the remote controller and press 1 zRECEIVER to turn the power on.

•Switch the input on the TV to that assigned to the unit. Use the TV's remote controller.

1.Select the input of the unit and start playback on the player or TV.

•Press 2 INPUT SELECTOR to which the desired player has been assigned. Press TV/CD to play the TV's sound. You can also use the input selector buttons on the main unit.

•Input will automatically be selected if the TV or player is CEC compliant and connected to the unit with HDMI cable.

2.Select the desired listening mode.

Press the 5 listening mode buttons to switch the mode so that you can enjoy different listening modes. For details about the listening modes, see "Listening modes" on the next page.

3.Adjust the volume with 9.

Remote controller parts name

To control the unit: The remote controller may be in the remote mode that enables control of other devices. Press the 2 RCV button to select the RECEIVER mode (for controlling this unit) before starting operation.

Back

1

2

3

4

5

6

7 8

9

F

G

H

1 z RECEIVER button: Turns the unit on or into standby mode.

2 REMOTE MODE/INPUT SELECTOR buttons: Switches

the input to be played.

3 Cursor buttons and ENTER button: Moves the cursor

and confirms the selection.

4 Q SETUP button: Displays the Quick Setup menu that allows you to set the frequently used functions including input selection and volume adjustment.

5 Listening mode buttons: Allows you to select the listening mode.

6 DIMMER button: Switches the brightness of the display.

7 ZONE2 button: For use when the unit is connected with

a pre-main amplifier in a separate room and sound is played there.

8MUTING button: Temporarily mutes audio.

9VOLUME buttons: Allows you to adjust the volume.

F RETURN button: Returns the display to the previous state.

G HOME button: Displays the Home menu that allows you to make advanced settings and use Internet radio and DLNA.

H DISPLAY button: Switches the information on the display.

How to use the remote controller

Batteries (AA/R6)

Remote control sensor

AV receiver

Approx.

16 ft. (5 m)

•If you do not use the remote controller for a long time, remove the batteries to prevent leakage.

•Note that keeping consumed batteries inside may cause corrosion resulting in damage of the remote controller.

10