Onkyo TX-NR535 manual Parts Name, Display, Rear Panel

Parts Name

1 2 3 4 5 6 7

(Taiwanese model)

8 9 F G H

1 23 4 5 6 7

98

Display

1 Lights in the following conditions. "Z2": ZONE 2 output is on. / "HDMI": HDMI signals are input and HDMI input selector is selected. / "ARC": Audio signals are input from ARC compatible TV and TV/CD input selector

is selected. / "3D": Input signals are 3D. / "USB" (): "USB" input is selected and USB storage device is connected. / "NET" (): "NET" input is selected and the unit is connected to the network. / "DIGITAL": Digital signals are input and the digital input selector is selected. / Cursor indicators: NET or USB is controlled.

Rear Panel

¼¼"USB" and "NET" will flash if the connection is not correct.

2 Lights when headphones are connected.

3 Lights when NET or USB is controlled.

1 RI REMOTE CONTROL jack: An Onkyo product with RI jack can be connected and synchronized with this unit.

2 FM ANTENNA jack (75 Ω) and AM ANTENNA terminal: The supplied antennas are connected.

3COMPONENT VIDEO IN and OUT jacks: Component video input/output jacks

4ETHERNET port: Used for LAN connection

5HDMI IN/OUT jacks: Digital video signals and audio signals are transmitted between the unit and the connected devices.

6SPEAKERS terminals: Speakers are connected.

7Power cord (North American, European, Australian and Asian models)

AC INLET (Taiwanese model): The power cord is connected.

8DIGITAL IN COAXIAL/OPTICAL jacks: Digital audio signals are input.

9Composite video and analog audio jacks: Analog

video signals and audio signals are input.

F MONITOR OUT V jack: Video signals are output to the connected monitor or TV.

G ZONE 2 LINE OUT jacks: Analog audio signals are output to the connected amplifier to be used in ZONE 2.

H SUBWOOFER PRE OUT jacks: A subwoofer with built- in amplifier is connected.

4 Lights according to the type of input digital signals and the listening mode.

5 Lights when Music Optimizer is enabled.

6Lights in the following conditions. "AUTO": Tuning mode

is auto. / "TUNED": Receiving AM/FM radio.  flashes while tuning is automatically performed. / "FM STEREO": Receiving FM stereo. / "RDS" (European, Australian and Asian models): Receiving RDS broadcasting.

7"MUTING": Flashes when muting is on.

8Lights in the following conditions. "SLEEP": Sleep timer

has been set. / "ASb" (Auto Standby): Auto Standby

is on. / "ch": Channel is being set. / "Hz": Crossover

frequencies are being set. / "m/ft": Speaker distances

are being set. / "dB": Speaker volume is being set.

9Displays various information of the input signals. Pressing DISPLAY displays the type of input digital signals and the listening mode.

15