Front & Rear
Rear Panel
1 | B | 3 |
| 4 | 5 | 6 |
7 | 8 9 |
| J | K |
| L |
A DIGITAL IN OPTICAL & COAXIAL | I TAPE IN/OUT |
These optical and coaxial jacks can be used to con- nect a CD or DVD player and other components with digital audio outputs.
BAM ANTENNA
These push terminals are for connecting an AM antenna.
CFM ANTENNA
This jack is for connecting an FM antenna.
DMONITOR OUT
The composite video output should be connected to a video input on your TV or projector.
EFRONT SPEAKERS B
These push terminals are for connecting speaker set B.
FFRONT SPEAKERS A, SURROUND SPEAKERS & CENTER SPEAKER
These push terminals are for connecting speaker set A.
G
This 
(Remote Interactive) jack can be con-
These analog inputs and outputs can be used to con- nect a cassette recorder, MiniDisc recorder, or other recorder with analog inputs and outputs.
JVIDEO 1 IN/OUT, VIDEO 2 IN & VIDEO 3 IN
The VIDEO 1, composite video, and audio inputs and outputs can be used to connect a VCR. The VIDEO 2 and VIDEO 3, composite video, and audio inputs can be used to connect another video source (e.g., cable TV, satellite TV, or a
KDVD IN/MULTI CH INPUT
The FRONT, SURROUND, CENTER, and SUB- WOOFER jacks can be used to connect a compo- nent with an analog multichannel audio output, such as a DVD player with a
LSUBWOOFER PRE OUT
A powered subwoofer can be connected here.
nected to the 
jack on another Onkyo compo- nent. The AV receiver’s remote controller can then
be used to control that component. To use 
, you must make an analog audio connection (RCA) between the AV receiver and the other component, even if they are connected digitally.
Note:
can only be used with Onkyo components.
HCD IN
These analog inputs can be used to connect a CD player with analog outputs.
See pages
8
