Onkyo TX-SR303E Using the Tuner, Listening to the Radio, Tuning into Radio Stations, found

Using the Tuner

Listening to the Radio

	TUNING MODE
	TUNING
	TUNING / PRESET	MASTER VOLUME
STANDBY/ON
	ENTER
	STANDBY
A SPEAKERS B	TONE+STEREO LISTENING MODEDISPLAY DIGITAL INPUT RT/PTY/TP MEMORY TUNING MODE RETURN SETUP

CLEAR

PHONES MULTl CH DVD VIDEO 1/VCR VIDEO 2 VIDEO 3 TAPE TUNER CD

TUNER

With the built-in tuner, you can enjoy AM and FM radio stations. You can store your favorite stations as presets for quick selection.

1	Use the [TUNER] input selector
	TUNER
	button to select either AM or FM.
	In this example, FM has been selected.
	Band	Frequency
	(Actual display depends on country.)

Tuning into Radio Stations

■Auto Tuning Mode

1 TUNING MODE	Press the [TUNING MODE] button
	so that the AUTO indicator
	appears on the display.
2	Press the TUNING Up or Down
TUNING / PRESET	[ ]/[ ] button.
	Searching stops when a station is
ENTER	found.

When tuned into a station, the TUNED indicator appears. When tuned into a stereo FM station, the FM STEREO indicator appears on the display, as shown.

TUNED AUTO

FM STEREO

■Manual Tuning Mode

1	TUNING MODE	Press the [TUNING MODE] button
		so that the AUTO indicator disap-

pears from the display.

2		Press and hold the TUNING Up or
	TUNING / PRESET	Down [ ]/[ ] button.
		The frequency stops changing when
	ENTER	you release the button.
		Press the buttons repeatedly to change
		the frequency one step at a time.

The American model changes FM frequency in 0.2 MHz steps, 10 kHz steps for AM. For European models it’s 0.05 MHz steps for FM and 9 kHz steps for AM.

In Manual Tuning mode, FM stations will be in mono.

Tuning into weak FM stereo stations

If the signal from a stereo FM station is weak, it may be impossible to get good reception. In this case, switch to Manual Tuning mode and listen to the station in mono.

36