First Time
3 Use the Up and Down []/[ ] buttons to select an input selec- tor, and use the Left and Right []/[ ] buttons to select:
IN1: Select if the video compo- nent is connected to COM-
PONENT VIDEO IN 1. IN2: Select if the video compo-
nent is connected to COM-
PONENT VIDEO IN 2. IN3: Select if the video compo-
nent is connected to COM-
PONENT VIDEO IN 3. VIDEO: Select to output composite
video and
4 | Press the [SETUP] button. |
| |
| Setup closes. |
SETUP |
|
Note:
•This procedure can also be performed on the AV receiver by using the [SETUP], [ENTER], and arrow buttons.
Speaker Configuration
This section explains how to specify your speaker con- figuration.
For speakers with a cone diameter
larger than
with a smaller diameter, specify
Small (default crossover 100 Hz). The crossover frequency can be
changed on page 50.
1 | Press the [RECEIVER] button, |
| |
RECEIVER | followed by the [SETUP] button. |
SETUP
2
3
4
5
Use the Up and Down []/[ ] buttons to select “2. SP Config,” and then press [ENTER].
While the “Subwoofer” setting is selected, use the Left and Right []/[ ] buttons to select Yes or No.
Yes: Select if a subwoofer is con- nected.
No: Select if no subwoofer is con- nected.
Use the Down [ ] button to select “Front,” and then use the Left and Right []/[ ] buttons to
select Small or Large.
Small: Select if the front speakers are small.
Large: Select if the front speakers are large.
Note:
• If the Subwoofer setting in step 3 is set to No, this setting is fixed at Large and does not appear.
Use the Down [ ] button to select “Center,” and then use the Left and Right []/[ ] buttons to
select Small, Large, or None.
Small: Select if the center speaker is small.
Large: Select if the center speaker is large.
None: Select if no center speaker is connected.
Note:
•If the Front setting in step 4 is set to Small, the Large option cannot be selected.
35