I N S T A L L A T I O N
Connecting to a TV and A/V Receiver via Dual HDMI
Rear Panel
HDMI Cable 2 | HDMI Cable 1 |
HDMI IN | HDMI IN |
ξThe BDP-105 provides a “Dual HDMI” connection to make sure you can enjoy the highest possible video quality, in addition to high bit rate audio content. You can use the included HDMI cable to connect the HDMI 1 output to your HDTV and use another HDMI cable (not included) to connect the HDMI 2 output to your receiver by setting the Dual HDMI Output option in the Setup Menu to Split A/V (see page 55 for details). In this way you can utilize the dedicated video processor available for the HDMI 1 output, and allow your receiver which has no HDMI 1.4 inputs to work without any loss to the digital audio signals.
ξThis configuration is recommended when you have a 3D-compatible display, but your receiver is not 3D-compatible. This allows you to send the video signal (3D, in this case) directly to the TV and the audio signal to the receiver to be distributed to your speakers as it normally would.
NOTE
ξPlease refer to the notes on HDMI connections available on page 11.
ξIf your receiver does not have HDMI audio input capability, please try the alternate connection methods discussed on pages 18 and 19.
