Manual No. |
| Series LGP Handheld CCD Scanner | ||
Buzzer Settings |
|
|
| |
|
|
|
|
|
| ZZ | Start/End | [[ |
|
| Program |
| ||
|
|
|
| |
|
| Menu |
|
|
|
|
|
|
|
| VZ | Buzzer | W[ |
|
| after |
| ||
|
| transmission |
|
|
|
|
|
|
|
| GD | Disable | HE |
|
| startup buzzer |
| ||
|
|
|
|
|
| GC | Enable startup | HD |
|
| buzzer |
| ||
|
|
|
|
|
Buzzer Settings - These options determine the buzzer type, tone, duration and loudness. By default, the buzzer is disabled for Linker type readers.
Buzzer Type - The buzzer may be disabled or enabled as either a hardware of software buzzer. Not all readers support both a hardware and software buzzer.
Buzzer Tone - If a software buzzer is used, the buzzer tone may be selected.
Buzzer Duration and Volume - If a software buzzer is used, a buzzer duration of 50, 100, 200 or 400 msec. may be selected. Volume may also be adjusted.
Buzzer Before Transmission - The good read buzzer will be activated after decoding the bar code, but before transmission. During transmission, the buzzer sequence will be completed.
Buzzer After Transmission - The good read buzzer will be activated after transmission.
Enable Startup Buzzer - When this option is selected, the reader will generate a single good read buzzer to indicate the reader is ready after the reader is supplied with power.
Disable Startup Buzzer - When this option is selected, the reader will not sound the buzzer after the reader is supplied with power.
Page 59