Optima 3600 | 11 |
LOG PLACEMENT
The Archgard pan burner and fiber logs are designed to give a realistic fire package, and are created to maintain their appearance from the day they were originally installed. Care must be given when first installing the logs and when removed for servicing, as they can be damaged or broken if not handled properly.
After opening the log set package, inspect the logs to ensure that no damage has occurred inside the package. Please report any damage immediately to your Authorized Archgard Dealer.
Gas and vent connections must be made before installing the logs and embers on the pan burner.
NOTE: Improper placement of logs may cause sooting on the internal parts and glass, and will not be covered under warranty. Do not use broken or damaged logs.
WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts specifically approved with this appliance may result in property damage or
Refer to the pictured instructions on the following pages that will show you how to correctly place the logs. The bottom of each log has a code stamped on it that can be used as a refer- ence to help locate the correct log.
IMPORTANT: Pins & holes must be aligned with logs & burner.
LOCATOR PINS ON BURNER SHOWN
LOCATOR PINS
