14-1168.fm Page 9 Thursday, January 20, 2000 2:05 PM
Cautions:
You must use a power source
!that supplies 3 volts DC and delivers at least 300 mA. Its
center tip must be set to positive and its plug must fit the Micro-40's DC 3V jack. The recommended adapter meets these specifications. Using an adapter that does not meet these specifications could damage the Micro-40 or the adapter.
•Always plug the DC adapter into the Micro-40 before you plug it into the ciga- rette-lighter socket, and unplug the adapter from the cigarette-lighter socket before you unplug it from the Micro-40.
Follow these steps to power the Micro-40 from your vehicle's battery.
MI
C
D C 3 V
1.Set the DC adapter's voltage switch to 3V.
2.Insert the 3.4 mm outer diameter/1.3 mm inner diameter barrel plug into the adapter's cord so it reads TIP+.
9
