USING THE CD PLAYER
USING THE REMOTE CONTROL
Several buttons on both the system and the remote control operate the same CD player functions.
To use the remote control, be sure that its front end is pointing with a clear path towards the front of the CD- 3329, then press the desired buttons.
LOADING A CD
1. Set the switch to CD.
2.Press OPEN beside the CD 1 or CD 2 compartment door to open either compartment.
3.Place a CD in the tray with the label facing up.
Note: Be sure the CD is securely in place.
4.Close the compartment door. CD, the current tray number and the total number of tracks appear after a few seconds.
Note: If no CD is installed, 00 appears again after a few sec- onds.
To unload the CD after it finishes play- ing, press OPEN and remove the CD.
10
