Optimus CD-3329 owner manual Preparation, Connecting Speakers

14-507.fm Page 5 Wednesday, June 30, 1999 12:01 PM

PREPARATION

CONNECTING THE

SPEAKERS

Caution: Do not plug in the power cord until you connect the speakers. Operating the CD-3329 without con- nected speakers could damage it.

The wires for the CD-3329’s detach- able speakers are rolled up in the re- cessed area at the back of each speaker.

Unwind the wire from each speaker, then follow these steps to connect the speakers to the system.

1.If you want to attach the speakers, align the dovetails on the side of the right speaker with the tracks on the right end of the main sys- tem and slide the speaker down until it clicks into place.

Align the dovetails on the side of the left speaker with the tracks on the left end of the main system and slide the speaker down until it clicks into place.

2.Press the red speaker terminal tab labeled R + on the back of the sys- tem, insert the stripped end of the right speaker’s stripped wire into the terminal, then release the tab.

3.Press the black speaker terminal tab labeled R – on the back of the system, insert the stripped end of the right speaker’s other wire into the terminal, then release the tab.

4.Repeat Steps 3 and 4 to connect the left speaker to the L + and L – terminals.

To disconnect the speakers from the system, disconnect the speaker wires from the CD-3329. Then (if speakers are attached) hold down the main sys- tem while you slide the speakers up- ward along the tracks.

5