PROGRAMMED PLAY
You can program up to 20 tracks from the loaded CDs to play in any se- quence.
1.Hold down PROGRAM until PRO- GRAM, CD 1 and CD 2 flash.
2.Press CD 1 or CD 2 to select your
desired CD. Then press SKIP 
or SKIP 
( 
or 
on the remote) to find the track you want to program.
3.When you reach the desired track, press PROGRAM. PROGRAM, CD 1 and CD 2 flash again for you to program the next track.
4.Repeat Steps
Notes:
•When 20 tracks are pro- grammed, PROGRAM, CD 1 and CD 2 do not flash because you cannot program any more tracks. To change the pro- grammed tracks, you must first
cancel the programmed sequence (see “Deleting a Pro- grammed Sequence”), then program a new sequence.
14
• To check a programmed
sequence, press SKIP 
(or 
on the remote) repeatedly
to review the tracks.
5.Press PLAY/PAUSE (or 
on the remote). The CD player plays the tracks in the order you pro- grammed, then stops.
Notes:
•Press PROGRAM then PLAY/ PAUSE (or 
on the remote) to start playing the sequence again from the beginning.
• You can press SKIP | or SKIP | ||
( | or | on the remote) to | |
move | through | the | programmed |
sequence during play.
Deleting a Programmed Sequence
To delete the programmed sequence, do any of the following:
•Open the CD compartment door.
•Set the switch to RADIO or TAPE.
•Press CONTINUOUS PLAY.
•Press CD 1 or CD 2.
