Optiview MPEG-4 To Record Event Video Only, Basic Operation, Viewing Live / Playback Video

User’s Manual

3.6.4To Record Event Video Only

If you want your DVR to record images with triggered alarm (both Alarm in and Motion) only, and stop recording under normal circumstances, then follow the steps to setup your unit:

•Enter the OSD setup menu with correct password.

•Enter <Record Setup> menu. Then select the item <ezRecord Setup>.

•Select <Daytime Record> and setup this item to <No>, which means no video will be recorded during daytime. When done, repeat the process to set the <Night record> and <Weekend Record> as well.

ezRecord Setup
How Many Days To Record	2 Days
Daytime Record	No
Night Record	No
Weekend Record	No
Overall Recording Condition	Fair

NOTE: The recorded event video can be accessed not only through the Event List but also through the Date/ Time Research using the PLAY key on the front panel.

4.Basic Operation

The MPEG-4 DVR allows user to access some general operations through the front panel easily. The following sections introduce the general operations of the unit.

4.1Viewing Live / Playback Video

The general functions in live and playback mode are described in the following sections.

4.1.1Viewing Modes

The MPEG-4 DVR supplies user versatile ways of viewing both live and recorded video. Following presents these view formats.

Viewing in Full Screen

Press any CHANNEL key directly to view the corresponding camera image in full view format.

23