Setup and Operation
OSD Menu Controls
The projector has an OSD that lets you make image adjustments and change the settings.
Navigating the OSD
You can use the remote control arrow buttons or the buttons on the top of the projector to navigate and make changes to the OSD. The following illustration shows the corresponding buttons on the re- mote control and on the projector.
1.To open the OSD, press the Menu button.
2.There are four main menus. Press 
to navigate through the menus.
3.Press 
to move up and down in a menu.
4.Press 
to change values for settings, and then press Enter to confirm the new setting.
5.Press Menu to close the OSD or exit a submenu.
Note:
Depending on the video source not all items in the OSD are available. For example, the Horizon- tal/Vertical Position items in the Setup menu can only be modified when connected to a PC. Items that are not available cannot be accessed.
22
