Setup and Operation
Adjusting the Projector Level
Take note of the following when setting up the projector:
•The projector table or stand should be level and sturdy.
•Position the projector so that it is perpendicular to the screen.
•Ensure the cables are in a safe location. You could trip over them.
1.To raise the level of the projector, lift the projector [A] and press the height- adjuster button [B].
The height adjuster drops down [C].
2.To lower the level of the projector, press the
3.To adjust the angle of the picture, turn the tilt adjuster [D] right or left until de- sired angle achieved.
20
