Appendices
Replacing the Projection Lamp
The projection lamp should be replaced when it burns out. It should only be replaced with a certified replacement part, which you can order from your local dealer.
Important:
1.The lamp contains a certain amount of mercury and should be disposed of according to local or- dinance regulations.
2.Avoid touching the glass surface of the new lamp, doing so may shorten its operation life.
Warning:
Be sure to turn off and unplug the projector at least an hour before replacing the lamp. Failure to do so could result in a severe burn.
1.Loosen the two cap- tive screws on the lamp compartment
cover (A). Remove the lamp compartment cover
(B).
41
