Setup and Operation
Starting and Shutting down the Projector
1.Connect the power cord to the projector.
2.Turn On the connected devices.
3.Ensure the Power LED is steady (flashing) and then press the Power button to turn On the projector.
The projector splash screen displays and connected devices are detected.
If the connected device is a PC, press the appropriate keys on the computer keyboard to switch the display output to the projector. (Check the user manual of the PC to de- termine the appropriate Fn key combination to change display output.)
See Setting an Access Password (Security Lock) on page 17 if security lock is enabled.
4.If more than one input device is connected, press the Source button repeatedly to switch among devices.
(DVD and HDTV are supported through the VGA connector)
5.To turn off the projector, press the power button. The Power Off? / Press Power again message appears. Press the Power button again to turn off the projector.
Caution:
Do not unplug the power cord until the fan stops, indicating the projector has cooled down.
16
