User Controls
SETUP Signal (RGB)
“Signal” is only supported in Analog VGA (RGB) signal.
Frequency
Change the display data frequency to match the frequency of your computer’s graphic card. Use this function only if the image ap- pears to flicker vertically.
Phase
Synchronize the signal timing of the display with the graphic card. If the image appears to be unstable or flickers, use this function to correct it.
H.Position
Press the 
to move the image left.
Press the 
to move the image right.
V.Position
Press the 
to move the image down.
Press the 
to move the image up.
Automatic
Automatically detects the signal. If you use this function, the Phase, frequency items are grayed out, and if Signal is not auto- matic, the phase, frequency items will appear for user to manually tune and saved in settings after that for next time projector turns off and on again.
