▼To Install an Optical Transceiver
1.Pull the white locking handle into the full horizontal position. You will feel the handle click into position when it is fully opened.
Note – If you are installing an optical transceiver in a Sun Fire T1000, ensure that the label and the edge connector is visible to you.
2.Holding the optical transceiver by the edges, align the transceiver with the slot in the Sun x8 Express Dual 10 Gigabit Ethernet Fiber XFP Low Profile Adapter and slide it into the opening.
3.Applying even pressure at both corners of the transceiver, push the transceiver until it is firmly seated in the slot.
