Use
Connect Hose
•With hose toward rear of the vacuum, push hose connector into opening in the bag lid.
Note: The flexible hose contains electrical wires for connection to the power nozzle and should not be used if damaged. The wires should not be visible through the outer skin.
Connect Hose Handle to Wand
•Attach the hose to the telescopic wand by pushing the handle (E) down into wand until the Handle Release button (F) locks the handle into place.
Connect Wand to Nozzle
•Attach the wand to power nozzle by fitting the button on the wand (G) into nozzle connector opening (H). Be sure nozzle is locked in place.
•To release, press down on the wand release pedal (I) and remove the wand.
7
