Maintenance - continued

Replace Brushroll Cover

Place brushroll cover back over the brushroll.

Replace the two cover screws.

Step 8

Replace Nozzle Hood

The wand must be in the upright locked position.

Position the hood on top of nozzle base. Make sure wires and buttons are aligned. Do not force the hood on.

Turn the nozzle over.

Replace the seven screws for the hood. See Step 1.

Step 9

When to Replace the Brushroll

When brushroll bristles are worn, the brushroll should be replaced.

To check condition of the bristles, hold a card on the bottom plate while turning the brushroll. Replace the brushroll if bristles do not touch the card.

ALWAYS DISCONNECT

VACUUM FROM

ELECTRICAL OUTLET

BEFORE STARTING

THIS PROCEDURE!

18

Page 21
Image 21
Oreck FC1000 manual Replace Brushroll Cover, Step Replace Nozzle Hood, Step When to Replace the Brushroll