Maintenance - continued
Install New Bag
• Slide the bag collar firmly into bag dock.
Complete the Installation
•Push rear edge of bag into the bag cavity. Make sure it is all the way down in the bag cavity (C).
•Close bag lid.
NOTE: The canister bag lid will not close without a filter bag in place.
MOTOR AND EXHAUST FILTERS
Removing and Cleaning the Motor Filter
•The motor filter is located behind the grill in the bag compartment. It protects the motor from dirt particles. If the filter become dirty, pull off grill and lift out filter.
ALWAYS DISCONNECT
VACUUM FROM
ELECTRICAL OUTLET
BEFORE STARTING
THIS PROCEDURE!
14
