Set Pre-Noise Transitions ---------

Scan two digits representing the desired number of Pre-Noise Transitions using the number pad from Appendix C: Keypad, padded with leading zeros (example: 03 = three transitions, 08 = eight, 15 = fifteen, etc.)

END ------------------------------------------

Post-Noise Settings

SET -------------------------------------------

Post-Noise

Don’t Transmit Post-

Noise---------

SetPost-NoiseTransitions ---------

Scan two digits representing the desired number of Post-Noise Transitions using the number pad from Appendix C: Keypad, padded with leading zeros (example: 03 = three transitions, 08 = eight, 15 = fifteen, etc.)

END ------------------------------------------

Programming Guide

19