Configuring
the Code 128/
and UCC/EAN
128 Options
Minimum Label Length
Use the bar codes in this section to configure the Code 128 and UCC/ EAN 128 options.
Follow these steps to set Code 128 and UCC/EAN 128 Minimum Label Length.
1.Identify the minimum length setting you want to make. The selectable range is 00 to 801 characters.
2.Scan the SET bar code on page 77.
3.Scan the SET MINIMUM LABEL LENGTH bar code.
4.Set the minimum label length by scanning the applicable digits from the bar codes on page 78. Return to this page and go to step five
If you are setting a label length less than ten,
you must scan a zero digit first and then the
length digit (e.g., 04, 06, 08).
NOTE
5.Scan the END bar code
Minimum Label Length
SET
SetMinimumLabelLength
END
1.The scanner will decode up to 80 characters, but the actual length read will vary depending upon interface type, the physical size of the bar codes, print quality and whether the bar code data con- sists of Code 128 code set A, set B, or set C characters. (The C128 character set C allows for more densely packed data, thus if the bar code includes all or mostly C128 set C characters, more characters can be decoded).
Programming Guide | 77 |