EN
RECEPTION OF RADIO CONTROLLED TIME SIGNAL
The time and calendar are
When used for the first time (after inserting batteries or pressing “RESET” key), and then after 5 minutes, the clock will start to receive the time signal. The signal reception indicator will be flashing for 7 minutes.
SIGNAL RECEPTION INDICATOR
The wave segment flashing means time signals are being received. The signal quality could be classified into 3 types:
No signal | Weak signal Excellent signal |
Note
1.The unit will automatically search for the time signal at 2:00 (3:00 or 4:00 is also available if the signal is not received at 2:00), 8:00, 14:00 and 20:00 each day.
2.Always place the unit away from interfering
sources such as TV set, computer, etc.
3.Avoid placing the unit on or next to metal plates.
4.Closed area such as airport, basement, tower block or factory is not recommended.
5.Do not start reception in moving articles such as vehicles or trains.
TIME AND CALENDAR MANUAL SETTING
If you are out of reach of the Radio Controlled sensor or if the reception is not reachable, the time and calendar can be set manually. As soon as the signal of sensor is received again, the clock will automatically synchronize with the exact time and calendar.
1.In normal time mode, press “SET CLOCK” key once to enter the time setting mode.
2.Press “+/CHANNEL” or
3.Press “SET CLOCK” to confirm. The setting order is:
4.Press “SET CLOCK” key to save and exit the setting mode.
6
